Shop Fittings

Is it okay to use high-output fluorescent grow light tubes in regular shop light fixtures? I just can't justify spending $200 to $300 for a fixture like the Tek-Light T5, especially when I need four of them. I want to be able to grow full vegetables, not just start seedlings.

do u know where i can get used fixtures for a 500sm shop? i know i can get from some auctions, but my question is, is there any place they only sell used shop fixtures eg counter shelves thank u

Where is a good place to shop for light fixtures (indoor) online? I'm thinking something modern.?

If i decide to open a shop and the fixtures and fittings are lower than the specification agreed how should? i proceed againts the people that have put the fixture and fittings in, would they be sussesful or not. what would be the relevant legislation, courts and cases

If i decide to open a shop and the fixtures and fittings are lower than the specification agreed what would b? i proceed againts the people that have put the fixture and fittings in, would they be sussesful or not. what would be the relevant legislation, courts and cases

if i decide to open a shop and the fixtures and fittings are lower than the specification agreed what would be my legal rights and how could i proceed.what would be the relevant legislation, courts and cases

Can you buy grow light bulbs that will fit in a 4ft shop light fixture?

The sandwich shop is £12,500 inl fixtures & fittings? £12,500 inlc all fixtures and fittings!

How many t8 fluorescent lights do i need for my shop? I have a 40x50 ft. shop with 16 ft. high celings. We are putting the t8 8 ft fluorescent light fixtures up. And i dont know how many to put in.

Why use stranded wire in light fixtures? I need to rewire a ceiling fixture where the sockets and some of the wires have deteriorated because of heat, even though we nexer use more than the recommended max 60 watt bulbs. The only wire I could find in my shop is Romex, which, of course, is solid wire, so I have to make a trip to Home Depot. I'll do that, but it started me wondering, why do we use solid wire in walls, but only stranded in fixtures? Is it because it's more flexible? Does it make better electrical connections with wire nuts?

Does anybody know if it is possible to buy replacement components for halogen light fixtures? I have 2 halogen light fixtures in my kitchen. They are the old type of fixtures, the ones for which you have to remove the glass heat shield in order to replace the actual light bulb. Last night when I was attempting to replace one of the bulbs, I accidentally dropped one of the glass plates and it broke. I don't want to buy a whole new fixture, just the protective glass, but I have been unable to find any replacement fixture components in the local shops. Does anyone know of a store/website that deals with this kind of thing? Thanks all!

We are selling our house and I have a question about "fixtures and fittings"? When we moved in I saw the previous owners leave with the loft ladder. Not a great issue, I replaced it with one from a DIY shop. It cost about £30. Now the house I am moving to doesn't have one. The fixtures and fittings list we filled in for their solicitors, didn't detail a loft ladder, so it's not part of the sale. Can I take it with me? Or am I being incredibly petty?

I have a shop fluorescent light fixture that has 2- 48" bulbs. One of the sockets doesn't work anymore.? Trading places of the bulbs proves that both bulbs are good, and that one socket has no power. I've checked all the wire connections and squeezed the terminal connectors on the sockets a little tighter, but it still doesn't work. I wouldn't think that the ballast would go half bad, or is this the likely problem?

Is the Automation of a tool design shop feasible or not?? Supose you have a tool design shop{a shop where machine tools are made example jigs,fixtures,dies,molds etc} is its automation {that is human intervention is totally eliminated or only partial human intervention is involved} feasible or not ?? Please help i am very confused about it thanks in advance.

How do I assemble a shop light? I've purchased a 24" T12 strip/shop light that takes 20 watt bulbs. It has a variety of wires colored yellow, white and black. There is no on or off switch. How do I make this thing work? What other tools do I need? Is there a light fixture product on the market like this that is already fully assembled (minus the bulbs, I can put those in lol! )?

Need help to set-up a Fashion Jewelry shop in Perth, Australia? Anybody has any idea or experience in setting up a Fashion Jewelry Shop i.e Fixtures& Furnitures, Local or Overseas Suppliers/Wholesalers, Staffs etc?

Where is the best place to purchase plumbing fixtures on-line? Any places you've shopped before, decent prices, stock availability, and customer service ratings?

Wiring fluorescent shop lights with plug? I bought six 48" fluorescent shop light fixtures for a homemade automotive paint booth. I got them from Lowe's. They had two styles of the fluorescent light fixtures. One that came with a three prong plug and one that needed to be wired. Oddly the fixtures with a plug where $9.99 and the fixtures that need to be wired where $19.99. I want to wire all six fixtures to one light switch, But could not justify paying twice as much for the same light minus a plug. I figured It would be easy to cut the plugs off and Straight wire them to a switch. But I can't figure out what the wires are. It has three wires going to a three prong plug. The main wire is flat and it is a series of three wires wires side by side. They are all white in color. One wire is smooth with the specs wrote on it. The other is solid white with four grooves. And the last wire is in the middle and is just solid white. How can I tell what wire is the "Hot" wire with out a multimeter? BTW: I thought about just wiring new plug sockets for the lights and putting the plugs on a switch, But I would much rather have them wired straight in. It will look cleaner, and I don't have to buy new boxes or new conduit. thanks for the help! The light fixtures are in cased in a sealed box's with an acrylic front. Their is no danger when using them. I have 10 other open fluorescent fixtures in my shop and I have painted approx 1 car per week for 7 years now. Ive sprayed 100's of gallons of paint and never once had any issues with flash fires.. Fluorescent bulbs don't get hot, and an electric spark is not enough to set off paint fumes. HVLP systems and the amount of air filtration leaves little to no danger when using fluorescent fixtures for painting. Mythbusters did a show where they filled a small room with 75% gasoline fumes by using an automotive spray gun, and they did everything they could to get an electric spark to start a fire. And it never did. They finally got a fire after they let the wire get so hot that it melted the insulation off and was glowing red. Paint is not falmeable enough to start a flash fire. Ive used ready heaters around painting with out any flare up's. Im not worried about lights.

does millers surplus sell hot tubs i'm looking for one stop shopping for kitchen cabinets and bath fixtures i want to find a hot tub and composite decking for a deck im building. i was told millers surplus allentown has good deals but i need the phone number. we're also redoing our kitchen and bathroom, i keep hearing their ads on the radio but i can never catch the phone number. so if anybody has the phone number for millers surplus or their web site please tell me. i heard they they have a store in pine grove where is that? what is the phone number for that store?

if my lease is up, can i take my purchased fixtures? Hi, My lease is ending this month and I am fighting with the landlord...They say i need to give up my improvements (added walk in fridge, stove, and exhaust fan. Also added nice customer counter. They say that i have to forfeit these purchases and leave them when i leave, but i don't think this is the case. If i bought them, i should get to take them right, assuming i resotre the shop to the condition it was prior to entering the lease. Thanks Hi, Further info: It is a commercial lease and a strip mall

Lighting a Flower Shop.? how should i design a lighting layout for a flower shop? what is the best fixture to use? what should i bear in mind while planning?

Why do my 48" Florescent Shop Lights keep Burning out? I have 6 of those 48" florescent shop lights in my garage/workshop. Especially in cold weather they seem to work intermittently and I find the bulbs (tubes) burn out more often than I would expect. (temp in garage 55 to 60 deg F in winter) Is there a solution to this problem? I tried replacing the lights fixtures (they are cheap enough), but to no avail....same issues.

Trying to install a kitchen light. Not sure which wire is positve and which is negative? Its a very old fixture over the kitchen sink. The pre existing fixture was an old shop light. When I removed it the wires were not connected. I have 3 old wires... 2 are the same color and the third is red. I tested the wires with one of those little pen probes and the red wire is hot and one of the same colored wires is hot. The new fixtures has a black and white color with the ground. Is the old red wire to match with the new white wire?? Any help would be greatly appreciated!

The shop I worked at recently laid everyone off. I need a job!? I have experience in production and prototype models and molds, and vacuuming forming along with checking fixtures and gauges. I can run all shop equipment. I also have 20 years in management(plant manager, foreman/leader positions) I am looking for work in the Detroit tricounty area. Please let me know of any leads.

Kwhrs saved in 2700 hrs of use if I changed my light fixtures from a 1.05 amp to .94 amp? 1 kwhr= $.10.? Trying to see what the payback would be if I purchased new , more efficient flouescent light fixtures for my shop. Current useage is 1.05 amps per fixture (T-12)and the new ones (T-8) draw .94 amps. Thanks!

If I buy a shop light is it safe or to dangerous to put uvb in it? If i get a shop light for cheap can i put It in a uromastyx cage and it doesn't catch on fire or anything. I have a big cage and don't want to spend 150+ on a light fixture NO I HAVE NOT BOUGHT THE LIZARD YET AND UROMASTYX LIVE IN A DESERT CLIMATE

How do I Ground a ballast.. PLEASE HELP !!!! ? Ok I bought a ready to use shop light fixture that you can just plug in the wall...I took the shop light apart and mounted everything on my WOOD fish tank canopy, There were two wires that were screwed together on the medal fixture..( too ground it ) ..Now that the ballast and everything is mounted on my wood canopy how do i Ground those two wires ??

I was working in a machine shop that recently laid everyone off. I n eed a job!? I have experience doing production and prototype models, molds,and vacuum forming along with checking fixtures and guages. I can run all shop equipment. I also have 20 years in management. (plant manager, foreman/leader positions) I am looking for work in the Detroit tricounty area. Please let me know of any leads.

electrical Q. how do you know if its the valace or if the light bulbs are going out? I have a shop light like fixture and it takes a long time to come on. Or sometimes I just keep flipping the switch and eventually it comes on. why is this? what do I need to replace the bulbs or the valace?

Please can someone advise what a commercial lease entails and why you would also have to pay rent? I've found a shop with a lease which includes fixtures & fittings with a weekly rent please can anyone explain why you would have both?

How to wire a 220v light (on/off) switch, which wires go where to which nuts? I have a 220 v 20amp breaker the controls lighting in shop, want to add an on/off switch between the breaker and the lights so I can turn on the lights when I enter the shop; there are two hots (120v) lines and a ground to the light fixtures; my switch is a 20 amp switch with 2 load nuts and 2 line nuts(one each on each side of the switch); and one green ground nut; where do I attach the hots from the breaker to the switch and where do I attach the hots from the switch to the fixture and finally where does the ground wire from the fixture and from the breaker attach to the switch.....Thanks for the help!!

Do you know how I can learn how to seal my walls from smoke leaking in at home? One room in our condo has smoke leaking through the walls/floor from a tobacco shop below us. What is the best way to learn how to seal the plugs, walls, fixtures, windows, etc?

I am looking for a 36 inch, twin bulb fluorescent light fixture? I need a source for light weight durable twin bulb 36" light fixtures. Like a shop light or better quality in 36 inch length.

Whats the difference between materials and equipment? In an assignment i have to write what you need to open a clothing shop and i have the following categorys: premises transport materials stock equipment fixtures and fittings general i dont really understand the different between materials and equipment

Whats involved in setting up a shop business? I want to open a shop - something like a £1 discount store. Just one shop to start with. I've checked out a couple of local commercial properties, annual rental rates are approx. £18,000. It's my first business so I'm literally starting from scratch - 1 thing I will no doubt probably need is 6 months rent up front. Things I have thought about: 6 months rent up front fixture, fittings new shop front labour stock Do I pay council business rates up front or on a monthly basis? I've seen a figure for £9,500. Is that per annum? Surely not monthly! The listing was quite unclear. Thanks in advance everyone - would prefer personal comments and experience rather than web links!

Does anyone know if there is a Rejuvenation-like store in the SF Bay or Central Coast areas in California? We just moved here from Oregon where we had Rejuvenation- recycled vintage house parts like old sinks and tubs, doors, woodwork, hardware, light fixtures etc. I'm not looking for a junk shop, but an organized and mostly reliable source for this type of thing here in California. I'd go anywhere from SF- San Jose- Monterey Peninsula. Any guidance would be appreciated.

Where do you find deep discounts in Cincinnati area? I'm looking for places to find SUPER discounts on things in the Cincinnati area. It can be for anything...food, housewares, fixtures, clothes, anything. Also, it can be in big quantities too...like restaurant supply places. I'm just looking for new places to shop!

What is are affordable places to buy bedroom furniture, lamps, etc.? I'm redoing my entire room in coffee shop colors (Caramel, beige, chocolate brown, etc.) and am having trouble finding furniture for it. It needs to be affordable obviously, but stylish or sophisticated isn't bad either. I DON'T want kiddy firniture. Places that offer bedframes, throws, pillows, lighting fixtures, rugs, chairs, desks, and other such things please.

I've seen a local shop/business for sale. What questions should I ask, and how can I raise the money? A small shop in my local town has a sign in the window saying 'Profitable Business For Sale, Apply Within'. The people who own it also own the Butchers next door, and they're selling that business for £25,000. The Butchers is bigger and probably more profitable, so I'm assuming the business I'm looking at will be somewhere in the region of £20,000. The shop has been there for years and seems to employ a couple of assistants, so I'm assuming it must be profitable. I can't see it being hit too hard should financial times get even worse either, as it's a discount store and seems to have many regular customers, as well as a roaring summer trade, as it's a seaside town. The store is on a High Street. It looks like it would need a little bit of updating, but it's mostly cosmetic stuff that'd be easilly fixed with a lick of paint, a new sign and some new fixtures/fittings. I wouldn't need to do this straight away, as the business is obviously making money how it currently is. I have almost 10 years of retail experience, as well as some useful business and accounting skills I picked up when I had an office job for a while last year. I think the business and the leasehold are for sale. My questions are as follows: 1) When I call them, what would be some good questions to ask? 2) What would be the easiest way for me to raise the money? I could potentially raise a deposit if needed. Any help and/or advice would be greatly appreciated. Thanks. The sign says they're selling due to retirement.

Have the guys been right all along, that the hardware store is a fun place to shop? Would you go there on a date with your mate? Do guys learn how to shop in Shop Class? I bought 2 wide-brimmed stylish sun hats, which I tried on in front of the mirrors in the Bathroom Fixtures Dept., and also a lovely bottle of eu d'Liquid Plum'r for opening my clogged pores. What have you found in the hardware store this spring? Hats? Plants? Fresh flowers? What can we find there for gifts? Nothing x-rated, please.

Seniors, have the guys been right all along, that the hardware store is a fun place to shop? Would you go there on a date with your mate? Do guys learn how to shop in Shop Class? I bought 2 wide-brimmed stylish sun hats, which I tried on in front of the mirrors in the Bathroom Fixtures Dept., and also a lovely bottle of eu d'Liquid Plum'r for opening my clogged pores. What have you found in the hardware store this spring? Hats? Plants? Fresh flowers? What can we find there for gifts? Nothing x-rated, please. Amazingly enough, Big John, as it happens, I do know what a stud finder is & know that it is not porn. Ho, ho! As usual, it looks like a 17-way tie, & I thank all of you for answering. I love all your answers & hope others come back to read the answers, too.

How do T8 fluorescent fixtures perform in the cold? I'm wiring a guys shop and he's only heating it with wood whenever he needs to work in it. He wants fluorescent strips as lighting and the first thing that came to mind was he needed high output fiixtures, so they would work in the cold. Today I called an electrical wholesaler for some prices and he told me a regular T-8 fixture will work fine down to -20C, or -4F. His shop won't likely dip below that level, buy i'm not sure how well it will work. I know T-12's are horrible in the cold Thanks

Are you bound to a proposal that you signed with a contractor? I am wanting to shop around a little more after considering the steep price that a contractor wants to replace a toilet, sink, sink fixtures, bathtub surround, bath and shower fixtures, and reflooring for $4800. If it is too steep, am I bound by the proposal I signed or can I call it off before they begin work???

why do people shop when nothing is needed? my wife takes me to shops and insists on buying me a shirt on sale. She tells me it is my color, style, fit. I tell her I have shirts in the closet that I haven't worn. I have more shoes now than in my entire life, 2 kinds of athletic shoes, hiking boots, work boots, dress shoes, sandals ..she has racks of shoes, clothes,. I told her she has to give away a shirt if she buys me a shirt. Same with pants and shorts, belts, underware, hats, socks. My GOD why do I need all these clothes??? long sleeve, short sleeve, polo shirts, t-shirts, A neighbor would every 4years have a yard sale and sell everything in the house, furniture, clothes, rugs, fixtures and re-paint and carpet and furnish the entire house and wardrobe People have car garages stuffed with boxes of things they never use. Why, Why.,whywhywhy

How to ground a ballast ??? fish tank Canopy ? I just bought a ready to use shop light and took it apart and mounted it on my wood fish tank canopy. their were 2 wires that were screwed together on the medal fixture ( to ground it ) .. And now i dont know how to ground those two wires beacuse EVERYTHING is mounted on my WOOD canopy. what should i do ?> One wire is white the other wire is yellow with a green strip., the ballast is powered by a 3 prong plug, that you plug in the wall.

How do I cut tin on a Lantern? I bought some really cool lanterns at a shop. They have glass panes in the doors and are constructed of tin as far as I can tell. I want to cut holes in the bottoms of them to put in a single light bulb fixture and turn them into bedside lamps. Does any one know how to cut tin with chemicals or a possibly a dremel tool? I don't need anything heavy duty here, the glass will shatter.

what are parts of a honda civic i should check after having an accident? I got in a car accident and got hit in the side, which hit my back tire. I am going to take the car to a body shop and i want to get the best fixture. whst should i make the mechanic check for?

Shop Light/Fluorescent in kitchen help?!? I have a light fixture in my kitchen that is a shop light type deal with fluorescent bulbs. The problem I have is it won't turn on properly. I have to flip the switch and wait about 10 minutes, then flip the switch off then back on for the light to come on. If I replace the bulbs it will work fine for a couple months and then go right back to the same thing. I thought these bulbs are suppose to last longer than that?? What could the problem be? I am by no means an electrician..

I am looking for an engineer to give us the equation for hold down clamp force.? I work in a small machine shop and we are having a heated debate. I am building a fixture and have gone through pains to put my bolt points low on the fixture, thinking that the less the length of the bolts will make the fixture more rigid and less likely to move. My partner says that the length of bolt has no effect on the amount of force required to move the fixture out of position, that friction is the force holding the fixture and length of bolt doesn't matter much. Thank you for taking the time to read this, any information would be helpful.

Light Fixture Point To Ceiling - Enough Light? I am shopping for a kitchen light fixture that would be over a kitchen table. I notice a fair amount of light fixtures point the light upwards rather than down. My concern is that a fixture point light up would not provide enough light. The fixtures I am looking are typically 120 to 200 watts incandscant. My kitchen table will be about 7 feet long.

If a house seller buys new appliances, fixtures, and remodeling materials, is it a concession? Suppose a house seller and buyer make a deal where the seller will pay for new appliances, fixtures, remodeling materials, etc.. First, the buyer gives the seller a big deposit, such as $10,000, as earnest money to buy the house. Then, the seller and buyer go shopping together, and spend the $10,000 on the new stuff. The buyer then does the work of installing everything and doing all the remodeling work, before even getting a mortgage. Then, with the new stuff installed, they get the house appraised, at a higher value because of the new stuff, and the buyer applies for a mortgage based on that higher value. The question is whether the buyer has to inform the mortgage company that the new stuff was purchased that way. In other words, is it a concession, or just a pre-sale home improvement? The mortgage company is informed that the buyer has paid the seller a $10,000 earnest-money deposit, of course, but is there any need to also tell them how the $10,000 was spent?

I need urgent help hanging a picture!!!!!!!!!!? I have to hand in a picture for a competition tomorrow morning! I just got it back from the framers and i realize there are no fixtures to hang it on the wall. What should I use to hang it? I can go to the shop first thing but the backing is thick cardboard, how would I attach fixings? please help!!!

Clearance shoppers, what good deals have you got of late? Today I was shopping for underwear. I found some really cute ones for 3 / $1.00. Normally $5.99 a piece. Last week I found a light fixture for $19.99 that was $ 89.99.

Who in San Antonio,Tx had busted pipes today? I was working in my shop outside and heard this loud noise! And YES a busted water fixture. I ran and turned off the water. Had to go to home depot and get a galvanized plug for a galvanized T that hooked up to a pvc pipe. Cut the pvc pipe off and will deal with that later. Not what I wanted to do on my day off.

Looking for a very specific kind of exfoliating face cloth.? I bought these at KMart years ago and can't find them in any store. Have you seen these for sale anywhere recently? They're standard size wash cloths, with one surface being a very thin white terry cloth, bonded to the reverse side which is a rough kind of foam material [sold in assorted pastels]. The corners are rounded off. They exfoliate nicely when used with a facial cleanser. They used to come folded into quarters in small clear plastic bags, on peg hooks at the corners of fixtures in cosmetics departments in discount stores. I've tried Wal-Mart, CVS, Bed Bath & Beyond, eBay and specialty shops with no luck. I don't want a substitute product...ONLY this item. (This is NOT like a Vic cloth.) Thanks!

How do I fix flourescent shop lights that are dim? I have a two tube 96" flourescent fixture. I replaced the ballast about 6 months ago (rapid start, not a cheapie) and I have checked the tubes to be sure they are good. Now the bulbs will not light all the way. They are dim and you can see the current swirling within the tubes. The guy at the supply house said if the ballast is good and the tubes are good, it must be the lampholders. How do you check the ballast to see if it is good or bad? Sorry, they are single pin bulbs, not HO.

Trying to install a kitchen light. Not sure which wire is positve and which is negative? Its a very old fixture over the kitchen sink. The pre existing fixture was an old shop light. When I removed it the wires were not connected. I have 3 old wires... 2 are the same color and the third is red. I tested the wires with one of those little pen probes and the red wire is hot and one of the same colored wires is hot. The new fixtures has a black and white color with the ground. Is the old red wire to match with the new white wire?? Any help would be greatly appreciated!

How to Ground a ballast --- ?? Aquarium HELP !!!? Ok i bought a ready to use shop light fixture,, I took it apart and mounted it on my Fish tank Canopy made of wood.. The fluorescent end caps are also mounted on the wood,, I have 2 wires that were screwed together on the fixture to ground it.. But now i dont have the fixture to ground it.. So what should i do to ground those to wires>>? Also i am using reflectors not sure what their usually made of .. the 2 wires had medal circles at the ends of them.. are you telling me to attach those to wires to the white plug wire that goes in the wall ?

What type of light should I use? I wanted to know what type of light should I use. I have used this "aquarium" light bulb I bought from Home depot which does a decent job. Whenever I go to the fish store I see that their lights are much much brighter and bring out the colors of the fish more. I DO NOT wanna spend more than 100 bucks on lighting equipment or bulbs. The question is: Do you know of a CHEAP light fixture/bulb that I could use? I am using a standard shop light fixture right now with the "aquarium" bulbs. Please include price, brand, and where I can get it at. Sorry, I have a 72gal bowfront

I need the simple or compound subject on this questions.? 1. My mother-in-law and father-in-law moved to Montana. 2. Next to the sofa is the suitcase to be put in the trunk of the car. 3. The executive travels extensively on her job. 4. The tenor and soprano have sung together before. 5. The dining room, including the light fixtures and the window treatments, has been redocorated. 6. They shopped, cooked, and deocorated in preparation for the party. thnx, u get the points since u were d only 1 that helped me. thnx again.

advice on home remodel? This is a pretty broad question. I am doing an addition to my home by adding a bedroom, full bath, and entertainment room. This is my first time with this sort of project. I am looking for highly rated types of products/model numbers for windows, doors, recessed lighting, bathroom fixtures, bathroom flooring/tiles, laminate flooring, and anything else. Any recommendations are appreciated. I will take these into consideration when researching and shopping for these items. Thanks

Choosing an Architect and writing a business plan.? I am currently trying to raise capital for a new retail shop I am opening, and need to write a business plan for banks and potential investors. However, the fixtures and construction of the new store are going to be the biggest cost, and I don't know how to estimate it. I am going to lease a space but will need to buy new fixtures for the store. Are architects willing to consult for this type of thing? How much does it cost? I am starting a consumer electronics store and need about 10000sq ft of space or more, with 8000 showroom and 2000 warehouse. I know there are a wide range of costs and options invovled, but any advice or estimate will be well received.

Should I buy this business? Is it a good deal? I'm thinking of buying a business that is $800,000 that (nets)$270,000 just under 3 times earnings. The business is a high end smoke shop in Toronto. About $125,000 of furniture and fixtures also $180,000 of inventory Do you think this is a good deal? Thank you

why does my t8 light fixture keep turning off after 90mins of being on? Its Instant light so no on/off switch.? The light fixture is a shop light. It holds 2 t8 48'' bulbs and is plugged in to a power strip. It is a 32w light. The power strip also has 3 other connections plugged in, but that what its for right? Anyway, the light turns on when plugged in and stays on but after about 90 minutes it turns off. I'm basically concerned because if it would be too much for the power strip it would fry the strip right? or is the shop light turning off by itself like a precaution built into the ballasts? it came with chains and hooks to hang the fixture. It has a fan to ventilate the room. Do i need another fan to ventilate the room better?? I have tried unplugging one of the cables from the power strip so now theres a total of 3 cables connected to the strip. Hopefully this fixes the problem.

self contained battery powered reverse warning system .? system that can move from car to car /not a permenant fixture / i have seen this product advertised on shopping chanel on sky tv .

what does this excerpt from a book meen? The old counter, shelves, and other fixtures of the little shop remained just as he had left them. It used to be affirmed, that the dead shop-keeper, in a white wig, a faded velvet coat, an apron at his waist, and his ruffles carefully turned back from his wrists, might be seen through the chinks of the shutters, any night of the year, ransacking his till, or poring over the dingy pages of his day-book. From the look of unutterable woe upon his face, it appeared to be his doom to spend eternity in a vain effort to make his accounts balance.—Ch. 1 from The House of Seven Gables by Nathanie Hawthorne

What kind of a job should I look for? This is best answered by people in the manufactoring field.? A little about me. I have years of expiernce in manufactoring Currently my job require me to use manual mill's and lathe's to make fixtures for the production shop. We do this to make the jobs run faster. I look at jobe and see if there is anything I can make to make any job run faster. I also am fluent with CAD. I have years of expiernce in the maintance field also both electrical and machinical. Any suggestions for a job that pays good?

What to wear? Okay so im starting this new job, it is a salesman job at a small business for lighting and fixtures, very nice expensive things for homes mainly. So the thing is im not sure what to wear to work there are no men salesmen from what I have seen and the women dress fairly nice, skirt/nice slacks/nice women dress attire i suppose. My question is what should I wear? A tie would be to much at this place I believe, I want to stand out to the customer but not overdue it and look like a overdressed moron. What would be some dress tips for myself and places to shop? I have hardly any dress clothes as it is but dress in polos and shorts most days. Also I am a 6' athletic built guy....any suggestions? Thanks in advance!!